Integrated standpipe and pumpset systems designed for fast, reliable water cart filling across mining, quarrying, and civil operations.
Allflo Standpipe & Pump Packages combine a galvanised standpipe with a diesel or electric pumpset to form a complete, high-volume water filling system.
Designed for demanding, continuous-duty environments
Typical Applications
▫️Haul road dust suppression ▫️Civil construction water management ▫️Water cart filling points on mining and quarry sites ▫️Hire fleets and contractor operations ▫️Emergency or temporary water supply ▫️Bulk water transfer
Operational Advantages
Turnkey operation - complete package ready for immediate deployment Rapid filling performance – reduce fleet downtime & improve onsite efficiency Built for harsh conditions - compliant, rugged and ready for mining use Flexible builds - heights, pump types & control options tailored to requirements Efficient operator workflow - designed for safety, usability & reliable operation
Engineer your own Standpipe & Pump Package
Engineered pumping systems sized to match your flow, head and duty-cycle requirements across civil, mining and industrial environments.
Pump Module
Standpipe Module
Base & Skid
Control & Automation
Hose & Accessories
System Upgrades & Add-Ons
Your pump module sets the performance of your entire package.
This section helps you understand the combinations available and how they affect flow, head, duty cycle and reliability.
Drive Types
Diesel-driven pumps for remote, off-grid and high-demand sites
Electric-driven pumps for fixed-site, low-maintenance operation
Hydraulic or PTO-driven pumps for specialist integrations
Wet-prime or auto-dry-prime pump ends matched to site conditions
Performance & Sizing Requirements
Available pump ends and drive configurations allow us to size the package to your site’s actual water-moving requirements:
Flow output ranging from low-volume transfer to rapid high-volume truck fill
Head capabilities suitable for flat sites, rising mains or long-distance transfer
Duty-cycle suitability for intermittent, continuous, or 24/7 operation
Pump sizes across small, mid-size and large-frame configurations
Materials (cast iron, stainless, specialty alloys) depending on water source
No matter your flow, head or conditions, we have a pump that can be sized to it.
Your control system governs safety, usability and operational efficiency across the entire standpipe package.
Control Options
Kentro digital controllers with auto-start/stop
Telemetry-enabled systems for remote monitoring
Simple manual control panels for low-complexity sites
Duty-protect logic for pump and engine performance
Operator Interface
Clear status displays
Auto-prime and shutdown protection
Lockable enclosures
Emergency stop integrations
Safety & Compliance
Mine-spec electrical components
Over-pressure and dry-run protection
AS/NZS-compliant wiring, guards and isolators
Automation Enhancements
Flow and pressure sensors
Fuel and engine monitoring
Data logging for fleet oversight
Upgrade-ready for SCADA and central control
When to Choose This Module Driven by:
Required level of automation
Distance between operators and fill point
Safety/environmental compliance
Fleet management and uptime requirements
From manual simplicity to full automation - we specify a control system to suit your conditions.
Your base & skid module determines how the full package is mounted, moved and handled on-site.
Base & Skid Types
Heavy-duty skids for stable, long-term setups
Trailer-mounted frames for rapid relocation
Compact bases for tight or elevated sites
Custom footprints to suit pad size, bunding or height limits
Structural Features
Hot-dip galvanised construction
Forklift pockets + certified lifting points
Reinforced pump mounts
Optional wheel kits for semi-mobile handling
Stability & Safety
Anti-vibration mounts
Anchoring provisions
Non-slip access surfaces
Lockable guarding
Optional spill containment
When to Choose This Module Select the base & skid based on:
Fixed vs mobile requirements
Site terrain and access
Operator safety needs
Compliance (civil or mine-spec)
Frequency of relocation
Whatever your site access or mobility needs, we’ll match the right base and skid configuration.
Optional enhancements that improve performance, safety, durability and day-to-day operation.
Performance Upgrades
Auto-dry-prime systems
High-flow elbows and manifolds
Improved pump ends for abrasive or corrosive water
Acoustic attenuation panels
Operational Add-Ons
Articulated or swivel outlets
Dual-outlet or multi-fill manifolds
Integrated lighting for night operations
Quick-connect couplings for rapid deployment
Durability & Protection
Anti-vibration mounts
Reinforced skids or impact protection
Heavy-duty mine-spec guarding
Weather protection panels
Monitoring & Alerts
Fuel level sensors
Flow and pressure alarms
Maintenance reminders and engine protection logic
When to Choose This Module Driven by:
Harsh site environments
Frequency of relocation
24/7 or heavy-duty cycles
Compliance or safety expectations
These upgrades ensure your standpipe package performs at its best in demanding conditions.
Your standpipe module determines how water is delivered safely and efficiently at the fill point.
This section outlines the main configuration choices and how they affect flow, access and compliance.
Standpipe Types
Standard 6–8" standpipes for civil and quarry use
High-flow 10–12" standpipes for rapid truck fill
Fixed or adjustable heights to suit site conditions
Custom builds for restricted or elevated access
Discharge Options
Single or dual outlets for throughput control
Swivel heads and articulated arms for operator ease
Flow-control and isolation valves for safer operation
Safety & Compliance
Mine-spec guarding, lockouts and platforms
AS/NZS-compliant fittings and corrosion-resistant builds
Anti-whip and anti-vibration protection where required
Mounting Options
Skid-mounted units for stable, long-term setups
Trailer-mounted units for rapid relocation
Modular bases compatible with all pump packages
When to Choose This Module
This module is selected based on:
Required truck fill rate
Desired operational footprint
Site terrain and access
Mandatory safety compliance requirements
Whether the standpipe must be fixed or mobile
No matter your fill rate or access, we will engineer a standpipe module to your needs.
Your hose and accessory package completes the water path between source, pump and standpipe.
Hose Options
Suction hoses sized to minimise losses
Discharge hoses for low → high-pressure duties
Layflat hose options for flexible site routing
Hose reels and storage where required
Fittings & Adaptors
Camlock, Bauer, Victaulic and custom fittings
Quick-connect adaptors for rapid setup
Isolation valves and check valves
Filtration & Protection
Strainers suited to dams, channels or raw water
Foot valves to maintain prime
Anti-whip restraints and hose safety measures
When to Choose This Module Based on:
Water source quality
Required flow rate
Fill point layout
Site safety requirements
A complete hose package ensures your standpipe system performs reliably and safely.
Ready to specify your standpipe package?
If you’d like help locking in the right pump, standpipe height, base or control system for your site, our team are ready to size and recommend a complete package for you.
Yes — height, inlet connection type (Flanged, Bauer, or Camlock), and optional flow-control items (flow meter, isolation valve, pressure gauge) can all be tailored to your operation.
